OpenDCC, DCC Sniffer - Download

      Download   Version
      Firmware  
      DCC Sniffer:  
      V2.07  
    30.01.2013
      V2.06  
    17.03.2010
      V2.05  
    17.03.2010
      V2.04  
    23.06.2009
      V2.03  
    12.08.2008
      Firmware  
      Xpressnet Sniffer:  
      V1.00  
    21.10.2008
      V1.01  
    10.11.2009
      V1.02  
    31.10.2010    		  
      Bootloader:       
      Batch File for Update:       
      USB Treiber (W2000/XP): 
      R1.0.2176      		 xml-file
    V1.0    		 ept-file
    V1.0    		  
      Schaltplan, Layout: 
      Schematics, Layout: 
      V1.0      		      

Wichtige Hinweise / Important Notes:

  • Die Software ist unter gnu public license freigegeben. Trotzdem möchte ich die Verteilung etwas im Auge behalten und habe eventuell ein Passwort auf dem Source Code vergeben. Dieses Passwort bitte ich unter Angabe des Namens und der Adresse per mail zu erfragen.
    The software is licensed under gnu public license. Nevertheless, I would like to have a (weak) control over the distribution. It may happen that there is a password on the zip file. Please ask by mail and supply Your name and address.
  • Der Bootloader benötigt das PC Programm AVROSP.EXE, dieses bitte von Atmel runterladen.
    The boot loader requires AVROSP.EXE, please download this file from Atmel.

Spenden / Donations

Change History (DCC Sniffer):

  • 2.00 -> 2.01 (2008-05-01)
    Any line end char is accepted: <cr> only, <lf> only and <cr><lf>
    preparation for railcom test (compile switch).
  • 2.01 -> 2.02 (2008-05-16)
    Added commands to capture an external trigger event.
    TRG+ will track both edges (rising and falling), TRGF or TRGR will only track one edge. TRG- turns off.
  • 2.02 -> 2.03 (2008-08-08)
    Added command and decode routines for BiDi messages.
    Max size of DCC message extended to 13 bytes (incl. xor).
  • 2.03 -> 2.04 (2009-06-24)
    Added decoding of analog function command.
    Added decoding of Fast Clock Commands.
  • 2.04 -> 2.05 (2010-03-17)
    Changed addr display for accessory command (this is now true DCC-address (was IB-like with an strange offset of 3)).
  • 2.05 -> 2.06 (2010-08-12)
    Added decoding of Register Mode programming commands.
  • 2.06 -> 2.07 (2011-02-23)
    Added decoding extended Idle commands (typically used for BiDi based logon procedure (railcom plus®).
  • 2.07 -> 2.08 (2016-10-12)
    Added decoding of addition dcc function commands (F29..F44) and (F45 ..F68)

Change History (XP Sniffer):

  • 1.01 -> 1.02 (2010-10-31)
    added decoding of BiDi messages
  • 1.00 -> 1.01 (2009-11-10)
    added fask clock decoding
    added decoding of prog response
    added decoding of extended accessory commands